# Yale Keypad Touch: Fingerprint Fails to Unlock Door

> CONTENT HERE

Source: https://support.shopyalehome.com/en_us/yale-keypad-touch-fingerprint-fails-to-unlock-door-rJDQ592W2

Last updated: 2024-05-20T22:29:52.030Z

This article provides steps to take if you are having issues fingerprint unlocking your smart lock with your Yale Keypad Touch. 

  

  

### Does your lock have power?

If your lock does not have power, check that the batteries are installed properly or insert new batteries.

  

  

### Is your finger clean?

Ensure your finger is clear of any dirt, residue, or wetness.

  

  

### Does your finger have good contact?

Make sure your finger has constant, good contact with the fingerprint sensor.

  

  

### Is the fingerprint scanner clean?

Make sure it is clear of any dirt or residue.

  

  

### ❗Is your fingerprint still failing to unlock the door?

Watch the light at the top of the keypad (above the Yale logo) and listen for the tones coming from your keypad.

If you scan the fingerprint and the LED light flashes green, the fingerprint was successfully scanned and the door should unlock.

If the door fails to unlock after you have scanned your finger, use the chart below to determine what your keypad alerts might indicate.

  

  

**Keypad LED Light Color**

**Alert**

**Amber**

Fingerprint was unsuccessfully scanned, or the fingerprint used is not registered in the keypad.  
  
Verify that you are using a fingerprint that has been registered for your specific keypad in the Yale Access app.  
  
if your fingerprint is registered and still not working, try unregistering and registering again.

**Red 3 times**

The keypad is unable to communicate with the lock.  
  
Make sure the lock has power and is within Bluetooth range of the keypad.

  

###
