# Yale Keypad: Entry Code Fails to Unlock Door

> CONTENT HERE

Source: https://support.shopyalehome.com/en_us/yale-keypad-entry-code-fails-to-unlock-door-HJiw5ch3

Last updated: 2024-04-11T17:41:23.474Z

This article provides help if you are having issues unlocking your smart lock using your Yale Keypad. 

  

  

### **Was your code entered incorrectly?**

If your Yale Keypad LEDs flash yellow, emits an error sound, and the door fails to unlock:

  

1.  Double check that the code is correct in the **Guest List** section of the Yale Access app.
2.  Try the code again.

  

### **Is the keypad communicating with the lock?**

If the keypad LEDs flash red 3 times, the keypad is not communicating with the lock.

  

Make sure the keypad is mounted within 8 feet from the lock and that the lock batteries do not need to be replaced.

  

  

### **Are you still encountering issues?**

1.  Ensure that you can connect the lock to the phone to make sure the issue isn’t with the lock. 
2.  If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. 
3.  Once you have rebooted the lock, try the entry code again. 
4.  If this does not work, the keypad must be reset. 

  

  

### **Keypad Reset**

Resetting the Keypad will remove all of the codes associated with the Keypad. On occasion a reset is necessary. If you do need to reset the keypad, do so through the Yale Access App: 

  

1.  Open the Yale Access App and go to **Keypad Settings** 
    
2.  Select the option to **Reset Keypad** (note: must be within Bluetooth range) 
    
3.  Select **Reset**. Once you confirm you want to reset the keypad, your device will automatically be reset. Once it’s completely reset, the progress bar LEDs will begin blinking white. Your keypad is no longer connected to your lock. 
    
4.  You can set up your keypad again in the Yale Access app.
    

  

**_❗Resetting the keypad will wipe out all existing entry codes and they will need to be added back after the keypad is set up again._**
