# How to Register Your Smart Module

> This article includes steps to register your Smart Module. A Smart Module can be registered on a lock with or without a keypad.      Steps to Register Your Y...

Source: https://support.shopyalehome.com/en_us/smart-module-registration-BJfeBsfd4

Last updated: 2022-04-22T18:41:58.452Z

This article includes steps to register your Smart Module. A Smart Module can be registered on a lock with or without a keypad.

  

## Steps to Register Your Yale Access Smart Module

Note: You must have your Master Entry Code already programmed before following the steps below.

1.  Remove the batteries from your lock
2.  Remove and reinsert the Smart Module into the slot in the battery compartment
3.  Reinsert the batteries
4.  Wake up the keypad by pressing the Yale logo or any key
5.  Enter your Master Entry Code and then the gear icon
6.  Press 7 followed by the gear icon
7.  Exit the menu by selecting the 'Previous' button (the red back arrow in the upper left corner) or wait for the menu to time out

## Steps to Register your Z-Wave, ZigBee, iM1 HomeKit, or Crestron Smart Module

Note: You must have your Master Entry Code already programmed before following the steps below.

1.  Remove the batteries from your lock
2.  Remove and reinsert the Smart Module into the slot in the battery compartment
3.  Reinsert the batteries
4.  Wake up the keypad by pressing the Yale logo or any key
5.  Enter your Master Entry Code and then the gear icon
6.  Press 7 followed by the gear icon
7.  Press 1 followed by the gear icon

## I Don't See the Number 7

If the number 7 does not appear on they keypad or touchscreen, it is likely due to one of the issues below. Review the related troubleshooting for help:

## Master Entry Code Not Set

A Master Entry Code is required at the end of your lock’s physical installation. If a Master Entry Code is not set, you will not be able to continue setup. Review steps to set a Master Entry Code here:

1.  Press or select the Gear key in the lower right hand corner of the keypad
2.  Press or select '1' then the Gear key
3.  Enter a 4-8 digit Master Entry Code
4.  Press or select the Gear key to complete steps

PLEASE NOTE: It is important to use a code that you will remember for programming and troubleshooting of the lock. It is best to use a separate code to lock and unlock your lever.

## Module Not Properly Seated

If you do not see the number 7, the Module may not be seated properly in the lock. Follow the steps below to seat the module:

  

1.  Remove a battery, wait 10 seconds for the lock to properly shut down
2.  Remove and re-insert the module properly
3.  Replace the battery and listen to the lock startup sound.

## Incompatible Lock

Check the model number to see if your lock [is compatible](https://support.shopyalehome.com/yale-compatibility-HJU81Tz_N). In most cases, you can find the model number on the inside of the lock's battery cover.

## Factory Reset

If none of the above troubleshooting works, you may need to reset the lock to its factory settings. You can find the factory reset method for each lock on the lock manufacturer’s website. 

PLEASE NOTE: If a lock is factory reset, all existing settings and entry codes on the lock are erased.

## How to Register the Module on a Lock with no Keypad

When prompted to register your lock in the setup flow:

1.  Locate the enrollment button, underneath the battery cover and next to the thumbturn (see image).
2.  Press and release the enrollment button after two seconds

The lock is now registered. Complete set up in the App.

![Lock Registration - No Keypad/Touchscreen](https://cdn.prod2.kustomerhostedcontent.com/media/5f6cab56313fd9001af97923/c731dfb5e637f56a7c2f503f91ce9b31.png)